Customization: | Available |
---|---|
Application: | Communication |
Type: | Single-mode Fiber |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Structure Details | Named | No. | Diameter | ||
Center | 20%AS wire | 1 | 2.70 | mm | |
Layer 1 | 20%AS wire | 4 | 2.70 | mm | |
SUS-Tube | 2 | 2.70 | mm | ||
Layer 2 | 20%AS wire | 10 | 2.70 | mm | |
According to IEEE std 1138,IEC 60794-4 standards | |||||
Fiber No. & Type | 48 | G652D | |||
Standard Diameter | 13.50 | mm | |||
Supporting Cross Section | 97.30 | mm2 | |||
Section of AS wire | 97.30 | mm2 | |||
Approximate mass | 687.0 | kg/km | |||
Rated Tensile Strength | 117.0 | kN | |||
Maximum Allowable Tension(40%RTS) | 46.8 | N/mm2 | |||
Everyday Stress(25%RTS) | 29.3 | N/mm2 | |||
Strain Margin Stress(70%RTS) | 81.9 | N/mm2 | |||
Modulus of Elasticity | 162.0 | GPa | |||
Thermal Elongation Coefficient | 13.0 | ×10-6/ºC | |||
Calculated D.C. Resistance at 20ºC | 0.878 | Ω/km | |||
Short-Circuit Current Capacity(40~200ºC, 0.25s) | 45.3 | kA2·s | |||
Ratio between Pull and Weight | 17.40 | km | |||
Temperature | Installation | -10ºC~+50 | ºC | ||
Range: | Transportation and Operation | -40ºC~+80 | ºC |
FAQ
Q1: Where is your factory located? How can I visit there?
A1: Our factory is located in Shenzhen City, Guangdong Province, China. All our clients, from home or abroad, are warmly welcome to visit us.
Q2: How many years experience in producing?
A2: More than 10 years, and our engineers have more than 20 years product experience.
Q3: Can provide sample to us?
A3: Yes,sample below 10m can be provided freely, but you need pay freight cost.